APC Smart-UPS 2200VA USB RM UPS Battery (DLA2200RM2U) Replacement

The APC Smart-UPS 2200VA USB RM UPS Battery (DLA2200RM2U) requires 8 batteries to replace it. The price above includes all 8 of them.

The APC Smart-UPS 2200VA USB RM UPS Battery (DLA2200RM2U) cross-references to the following:

Universal Power Group UB1250 (12V, 5AH) Manufacturer Universal Power Group Model UB1250 Weight 3.12 Volts 12 Amp-Hour 5 Length 3.57 Width 2.75 Height 4 Terminals F2 (0.25 Tab) Warranty 1 Year Chemistry SLA The state-of-the-art lead-acid battery is the valve-regulated type (sometimes called "sealed" or maintenance-free), which fixes the acid electrolyte in a gel or in an absorptive fiberglass mat. The advantage of this design is that the battery needs no water additions, can be operated in any position, and can be used in close proximity to people and sensitive equipment. Additional benefits: maintenance-free,sealed no-leak design, higher cranking amps, lower self-discharge, greater vibration resistance, heavy duty, no-corrosion terminals.

There are two possible different batteries for the DLA2200RM2U. It could be a 12 Volt 5 Amp battery, or a 12 Volt 8 Amp battery. This selection is the 12 Volt 5 Amp model. Double check the actual size of the batteries being replaced. UPS replacement battery packs contain replacement batteries only. You must reuse your existing cabling and hardware. APC model numbers are very similar, so check the model number listed here with the barcode label on the back or bottom of your unit.